GBP (£)
Code: OPACR
This Dibond hanger is a perfect photo hanging system
for hanging your dibond material from 1 kg to 8 kg . You simply stick the hanging plate on the back of the panel, after which you can easily hang your photo on the wall with the supplied wall mounting materials.
ATTENTION: the plate must remain under pressure from a weight for 24 hours before you hang it up. This product contains a dibond hanger, wall bracket,
alcohol whip, bumper stops, screw and plug.
alcohol whip, bumper stops, screw and plug.
INSTRUCTIONS
1. Allow the panel and the mounting plate to acclimate to room temperature (20 ° C).
2. Remove the protective film from the back of the panel.
3. Determine the location of the hanging plate in the center at 1/4 distance from the top. Clean the area with an alcohol swab and then dry with kitchen
paper.
4. Stick the hanging plate to the panel and press firmly for 20 seconds.
5. Pressurise the mounting plate with a heavy object (15 kg) and let it rest for 1 hour.
6. Wait 24 hours before hanging the panel.
NOTE: Not suitable for plexiglass with print on the back.
1. Allow the panel and the mounting plate to acclimate to room temperature (20 ° C).
2. Remove the protective film from the back of the panel.
3. Determine the location of the hanging plate in the center at 1/4 distance from the top. Clean the area with an alcohol swab and then dry with kitchen
paper.
4. Stick the hanging plate to the panel and press firmly for 20 seconds.
5. Pressurise the mounting plate with a heavy object (15 kg) and let it rest for 1 hour.
6. Wait 24 hours before hanging the panel.
NOTE: Not suitable for plexiglass with print on the back.